 |
Share to:
MASUNG MS-D245, Embedded Thermal Printing Module, Kiosk Thermal Receipt Label Printer 58mm with Auto Cutter
Key features of the USB 58 mm Thermal Receipt Label Printer:
1. Reliable auto cutter
2. Compact panel mounted structure
3. Ultra high speed
4. Wide input voltage range
5. Full/partial cutting (by adjustable)
6. Rear paper auto loading
7. Automatic paper feeding, automatic paper cutting, black mark detection, paper end, paper output detection, etc.
8. Support the printing of one-dimensional bar codes and two-dimensional codes
9. Stainless iron body, small size, convenient installation
| Quantity: | |
|---|---|
-
MS-D245
-
MASUNG
Specification:
Ideal Applications for:Gas pump station Parking lot system Ticket vendor High way meters Lottery device Gaming kiosk And more Please note: we are open to offering custom solutions for this printer to meet your personalized specific needs. |
| mechanism： | CAPD245 | ||
| Printing method | Thermal dot line printing | ||
| Dots/line | 384 dots/line | ||
| Dot pitch | 8 dot/mm | ||
| Paper width | 58 mm | ||
| Printing width | 48 mm | ||
| Paper thickness | 54~91 um | ||
| Printing speed | 150 mm/s | ||
| Paper loading | Paper auto loading | ||
| Sensors | Head temperature | Thermistor | |
| Paper press shaft | Mechanical switch | ||
| Paper end | Photo interrupter | ||
| Font size | ASCII:9*17;12*24; Chinese: 24*24 | ||
| Power supply | Logic circuit | 2.6~3.6 V | |
| Motor | 4.75 ~9.5 V | ||
| Reliability | Circuit: over 1,000,000,000 pulses Cutter: over 7,000,000 cuts Thermal head: over 100 km MCBF: 37,000,000 lines | ||
| Ambient environment | Work temperature | -10 ℃~50℃ | |
| Work humidity | 20~85% RH | ||
| Storage temperature | -25℃~70℃ | ||
| Storage temperature | 10~90% RH | ||
| Dimension (L*W*H) | 127*89*93 mm | ||
| Weight | Approx 0.45 kg | ||
| Interface | RS-232 /USB | ||
| power supply | DC 9~24V/2.5A | ||
| Command set | ESC/POS | ||
| Barcode | supported | ||
| Firmware location | 2 M NV Flash memory | ||
| Buffer | 4 KB | ||
| SRAM | 20 KB | ||
| Driver | USB driver | ||
| System | Windows/Linux/Android OS | ||
| Accessories: | paper near end sensor; | ||
| Paper roll holder | |||
| Paper bezel (paper guide mouth) | |||
| Interface connector | |||
| Power supply unit | |||
| Cable | |||
Specification:
Ideal Applications for:Gas pump station Parking lot system Ticket vendor High way meters Lottery device Gaming kiosk And more Please note: we are open to offering custom solutions for this printer to meet your personalized specific needs. |
| mechanism： | CAPD245 | ||
| Printing method | Thermal dot line printing | ||
| Dots/line | 384 dots/line | ||
| Dot pitch | 8 dot/mm | ||
| Paper width | 58 mm | ||
| Printing width | 48 mm | ||
| Paper thickness | 54~91 um | ||
| Printing speed | 150 mm/s | ||
| Paper loading | Paper auto loading | ||
| Sensors | Head temperature | Thermistor | |
| Paper press shaft | Mechanical switch | ||
| Paper end | Photo interrupter | ||
| Font size | ASCII:9*17;12*24; Chinese: 24*24 | ||
| Power supply | Logic circuit | 2.6~3.6 V | |
| Motor | 4.75 ~9.5 V | ||
| Reliability | Circuit: over 1,000,000,000 pulses Cutter: over 7,000,000 cuts Thermal head: over 100 km MCBF: 37,000,000 lines | ||
| Ambient environment | Work temperature | -10 ℃~50℃ | |
| Work humidity | 20~85% RH | ||
| Storage temperature | -25℃~70℃ | ||
| Storage temperature | 10~90% RH | ||
| Dimension (L*W*H) | 127*89*93 mm | ||
| Weight | Approx 0.45 kg | ||
| Interface | RS-232 /USB | ||
| power supply | DC 9~24V/2.5A | ||
| Command set | ESC/POS | ||
| Barcode | supported | ||
| Firmware location | 2 M NV Flash memory | ||
| Buffer | 4 KB | ||
| SRAM | 20 KB | ||
| Driver | USB driver | ||
| System | Windows/Linux/Android OS | ||
| Accessories: | paper near end sensor; | ||
| Paper roll holder | |||
| Paper bezel (paper guide mouth) | |||
| Interface connector | |||
| Power supply unit | |||
| Cable | |||
